PDA

View Full Version : Rubber Snap-In Valve Stem Replacement For H2 TPMS



tpms support
09-17-2013, 10:07 PM
http://a248.e.akamai.net/origin-cdn.volusion.com/vfpzc.jmvkr/v/vspfiles/photos/SK0008-2T.jpg?1357208462

Whenever a rubber snap-in valve based TPMS sensor is removed from a wheel, it should be replaced with new rubber snap-in valve. Attempting to reuse the original rubber snap-in valve and valve core may result in an air leak.

Hummer; H2; 2010-2008

http://www.tpms.com/product_p/sk0008.htm