PDA

View Full Version : BMW 5 Series TPMS Reset Procedure



TPMS Help
07-24-2013, 06:22 PM
Relearn Code: BMW-1

Relearn Procedures: Inflate all tires to pressure indicated on tire placard.

If equipped with iDrive:

1. Turn ignition to ON position (engine off).
2. Press iDrive controller to use ā€œiā€ menu.
3. Select SETTINGS, press iDrive controller.
4. Select CAR/TIRES, press iDrive controller.
5. You may need to switch to the top field, select TIRES:RDC, and press iDrive controller.
6. Start engine.
7. Select CONFIRM TIRE PRESSURE, press iDrive controller.
8. Vehicle must be driven to complete relearn.

If not equipped with iDrive:

1. Start engine.
2. Hold turn signal lever in the up or down position until TPMS telltale and RESET are displayed.
3. Press button at end of turn signal lever.
4. Press and hold button at end of turn signal lever until a check appears after RESET.
5. Vehicle must be driven to complete relearn.