Results 1 to 6 of 6

Thread: Resetting Mercedes TPMS

  1. #1
    KenTheTPMSMan
    Guest

    Resetting Mercedes TPMS

    This thread is to discuss resetting Mercedes TPMS.

  2. #2
    KenTheTPMSMan
    Guest
    Mercedes Benz has 3 styles of reset procedures for their vehicles:

    Type 1:

    -Inflate all tires to recommended on placard.
    -Turn ignition on (engine off)
    -Press forward/back button on steering wheel until trip and odometer are being shown.
    -Press up/down until tire pressure monitor is displayed.
    -Press + button, TIRE PRESS. MONITOR-ACTIVATED!-PRESS. Displays after driving a few minutes.
    -If REACTIVE-TIRE PRESS. MONITOR appears then repeat process.
    -If TIRE PRESS.-CHECK TIRES appears then tire pressure is too low and needs to be inflated.

    To relearn new sensors ID's car must be driven 10 mins at over 15 mph.

  3. #3
    KenTheTPMSMan
    Guest
    Type 2:

    -Inflate all tires to recommended on placard.
    -Turn ignition on (engine off)
    -Press UP/DOWN button (on side of steering wheel) until TIRE PRESSURE MONITOR CONNECTED REACTIVATION USING + is displayed
    -Press + button, TIRE PRES. NOW OK? is displayed.
    -Press + button, TIRE PRESSURE MONITOR REACTIVATED is displayed.

  4. #4
    KenTheTPMSMan
    Guest
    Type 3:

    -Inflate all tires to recommended on placard.
    -Turn ignition on (engine off)
    -Press UP/DOWN button (on side of steering wheel) until RUN FLAT TIRE INDICATOR ACTIVE. REACTIVATION POSS.: + is displayed
    -Press + button, TIRE PRES. NOW OK? is displayed.
    -Press + button, RUN FLAT INDICATOR REACTIVATED is displayed.

  5. #5
    AndresS500
    Guest
    Thanks for the info. Saved me a trip to the dealer.

  6. #6
    Allen@TheTPMSForum
    Guest
    Here is a link on how to reset Mercedes TPMS http://www.tpmsrelearn.com/2016/12/05/mercedes-3/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •