The valve stems are very close to hitting my brake rotors. What can I do to move them?
The valve stems are very close to hitting my brake rotors. What can I do to move them?
You can get the wheels dual drilled and use a TPMS adaptor depending on your vehicle.
you can buy a mounting band (for ford banded sensors) and a cradle. some of the cradles have a rim hole size hole drilled in them, you can fix the sensors in the cradle mounted in the wheel and put a plain rubber snap-in stem in the hole. This is an alternative to drilling the wheels.
Although the cradle is another solution, it is more of an archaic design and is very prone to failure over time. The best route is to use an adapter.