Hey Folks,
Today we are reviewing the Schrader EZ-sensor system. EZ-Sensor is by far the most popular system on the market for programmable-universal applications. Schrader has 2 part numbers #33000 for the 315MHz and #33100 433MHz version and they now have an aluminum clamp-in stem option #34000 to replace the #20008 rubber snap in stem.
The EZ sensor system does require either a scan tool with programming capability or the Bartec TPMS pad to program the blank sensors. Today we will be using the Bartec 400SD to do our demonstration.
Attachment 76
First thing we need to do is go into out toolkit...
Attachment 77
and we will be programming a sensor...
Attachment 78
Then we choose our Make...
Then model...
Attachment 80
and year...
Attachment 81
Now we can select which sensor brand we are programming, in this case the EZ Sensor...
Attachment 82
We will be creating 1 sensor today..
Attachment 83
Now we are prompted to put the correct part in front of the tool for transmission..
Attachment 84
and go...
Attachment 85
process...
Attachment 86
done...
Attachment 87
Now lets say you want to change to the clamp in stem...
Attachment 88
remove the existing stem with your Schrader torque tool #20140
Attachment 89
Notice the flat sides of the stem insert on the valve and on the sensor, this is why you want to do the assembly off the wheel as to create proper alignment...
Attachment 90
Attachment 91
tighten until the tool "pops" at torque...
Attachment 92
Ready for install on vehicle...
Attachment 93
The EZ Sensor system is very easy to use with a step by step programming setup that makes it easy for even a novice to create replacement sensors for over 80% of the vehicles on the road. If you have access to the vehicle the system can also be used to clone an existing set, saving consumers time for resetting the TPMS system each year with the summer/winter change overs. We also like that there is now a clamp in and snap in valve stem option so you can match a vehicles OE style of valves. For most shops this is a very flexible program that can help get their customers back on the road quickly while keeping the shops inventory costs down not having to stock over 120 different part numbers. Most tire shops now are also in need of a scan tool for service, so the investment in one is no longer an extra cost as its being utilized daily for other features. The cost of the sensors and the valves are relatively low so it makes it a great option vs. the OEM part price.
Having an option at your shop to get customers back on the road is must in today's wheel/tire market. With so many different vehicles and part numbers its hard to keep up, not to mention the costs involved. Having a shelf full of a programmable option is a no brainer. The EZ Sensor is the most popular for a many reasons, in part its expanded vehicle coverage, ease of programming, and cost. Not to mention EZ Sensor is made by Schrader the largest TPMS supplier in the world with more OE part numbers than anyone. Its an easy sale to consumers when you can say they make it for the OE.
Overall EZ Sensor is a great product and is easy to use, a favorite in our opinion.