Attachment 60




http://www.tpmsmadeeasy.com/pdf/DOP-11-100-Clean.pdf


I.
TECHNICAL SCOPE
This bulletin is an outline of the
Approved OEM Requirement
for replacing all
TPMS (Tire Pressure Monitoring System)
sealing components when reinstalling
a clamp
-
in style TPMS sensor.
Approved OEM Requirement for Re
-
Installing an TPMS Sensor
The OEM
requires
that the
sealing components be replaced
when re
-
installing a
TPMS sensor. The replacement components are supp
lied in Schrader
-
Bridgeport TPMS service packs, which are sensor specific. Each Schrader
-
Bridgeport TPMS service pack contains a nut, a valve core, a cap, and a
grommet. Schrader also supplies service packs for competitor sensors that may
contain other c
omponents such as stems, extra washers and multiple caps. In
each case, all components of the service pack should be used.