FRD-2

1. Inflate all tires to the pressure listed on tire placard.
2. Turn ignition cycle to OFF.
3. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
4. Press and release brake pedal.
5. Turn ignition cycle to OFF.
6. Cycle ignition from OFF to RUN position 3 times, ending in RUN position.
7. Horn will sound once and TPMS telltale will blink once train mode is initiated. If equipped with message center, it will TRAIN LF TIRE. Place relearn magnet on LF sensor until horn sounds.
8. Proceed as in step 6 for the next 3 sensors in the following order: RF, RR, LR.
9. After training LR, the horn will sound and message center will display TIRE TRAINING MODE COMPLETE, if equipped.