CHR-1

1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON position. (engine off)
3. Press and release the MENU button on the EVIC until the message RETRAIN TIRE SENSOR _NO is displayed.
4. Press the STEP button to select YES.
5. Press the MENU button to start the relearn process. The EVIC will display the message, TRAIN LEFT FRONT TIRE.
6. Starting at LF tire, place relearn magnet over valve stem until horn sounds.
7. After horn sounds, proceed as in step 5 for the next 3 sensors in this order: RF, RR, LR, SP (if equpped).
8. Once the EVIC displays the message TRAINING COMPLETE, depress the STEP, C/T, RESET, or MENU buttons to exit the relearn procedure.