Relearn Code: SUZ-2

Relearn Procedures:

1. Inflate all tires to pressure indicated on tire placard.
2. Turn ignition to ON position (engine off)
3. Press and hold down drivers side door switch for 2 seconds. Release then press again for 2 seconds. Release, then press again for 5 seconds.
4. Place learn tool over LF tire and press activate/test button, then proceed to RF, RR, and LR. Sensors must be activated within 90 seconds.
5. When each sensor ID has been received by control module TPMS telltale will be displayed for 5 seconds.