Relearn Code: LEX-5

Relearn Procedures: Initialization following rotation and tire replacement.

1. Turn ignition to LOCK position.
2. Inflate all tires to pressure listed on tire placard.
3. Start engine.
4. Hold down tire pressure warning reset switch until TPMS telltale blinks 3 times.
5. In several minutes, the multi-information display will display the air pressure in all 5 tires.
6. Turn engine off.

*A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.

**Vehicle may be equipped with a Main/2nd switch located at base of driver side knee bolster, underneath glove box, or inside glove box. Sensor IDs must be written to the position the switch is pressed.