Bartec TPMS Mechanical Tool Kit

What’s New:
August 2012 TPMS Mechanical Tool Kit

Attachment 41

Try the new TPMS TECH400SE Master Kit featuring:

TPMS “Loop Rest Tool” - Quickly and accurately reset the looping condition common with Toyota and Lexus vehicles. (for vehicles prior to 2009).
Valve Core “Torque Tool” - Correctly tighten the valve core on TPMS sensors to the preset torque. Prevents over tightening.
TPMS Sensor “Fishing” Tool - Attaches to the thread end of the valve stem and allows the sensor to drop inside the tire for safe handling and removal.
T20 Torque Tool - Correctly tighten the torx screw that holds the sensor to the clamp in valve stem. Preset to 35in/lbs and prevents over tightening.
T10 Torque Tool - Correctly tighten the torx screw that holds the sensor to the clamp in valve stem. Preset to 12in/lbs and prevents over tightening.
Multi-Purpose Grommet Tool - Removes the 11mm & 12mm sensor stem nuts. Also seats the sealing grommets on the sensor.
Ergonomic Torque Wrench & Sockets - 3/8” drive torque wrench with 11mm & 12mm sockets. properly tighten to torque the TPMS sensor nuts quickly, accurately and ergonomically (20 to 90 in/lbs).
Digital Tire Pressure Gauge - Quickly verify tire’s air pressure with the Accutire pressure gauge. Accurate to 5psi.

Please browse our website for more information about Bartec USA LLC and our range of TPMS Tools and our professional Tire Pressure Monitoring System support.