Resetting Mercedes TPMS

This thread is to discuss resetting Mercedes TPMS.

Mercedes Benz has 3 styles of reset procedures for their vehicles:

Type 1:

-Inflate all tires to recommended on placard.
-Turn ignition on (engine off)
-Press forward/back button on steering wheel until trip and odometer are being shown.
-Press up/down until tire pressure monitor is displayed.
-Press + button, TIRE PRESS. MONITOR-ACTIVATED!-PRESS. Displays after driving a few minutes.
-If REACTIVE-TIRE PRESS. MONITOR appears then repeat process.
-If TIRE PRESS.-CHECK TIRES appears then tire pressure is too low and needs to be inflated.

To relearn new sensors ID's car must be driven 10 mins at over 15 mph.

Type 2:

-Inflate all tires to recommended on placard.
-Turn ignition on (engine off)
-Press UP/DOWN button (on side of steering wheel) until TIRE PRESSURE MONITOR CONNECTED REACTIVATION USING + is displayed
-Press + button, TIRE PRES. NOW OK? is displayed.
-Press + button, TIRE PRESSURE MONITOR REACTIVATED is displayed.

Type 3:

-Inflate all tires to recommended on placard.
-Turn ignition on (engine off)
-Press UP/DOWN button (on side of steering wheel) until RUN FLAT TIRE INDICATOR ACTIVE. REACTIVATION POSS.: + is displayed
-Press + button, TIRE PRES. NOW OK? is displayed.
-Press + button, RUN FLAT INDICATOR REACTIVATED is displayed.

Thanks for the info. Saved me a trip to the dealer.

Here is a link on how to reset Mercedes TPMS http://www.tpmsrelearn.com/2016/12/05/mercedes-3/